
Schwinn
Favorite team: | Ole Miss ![]() |
Location: | Batesville |
Biography: | |
Interests: | |
Occupation: | IT Infrastructure Analyst |
Number of Posts: | 74 |
Registered on: | 1/18/2013 |
Online Status: | Not Online |
Recent Posts
Message
re: Lane putting in work recruiting
Posted by Schwinn on 9/24/21 at 8:14 am
I would assume he was/is there recruiting Justyn Martin, the 4* QB from Inglewood, CA who just decommitted from Cal and we look to be trending for...
re: Cnc build ( Help needed )
Posted by Schwinn on 7/4/19 at 11:46 am
I started down this road about 3-4 years ago and built my own custom 4x4 CNC one with the parts from Openbuilds.com
They have a lot of builds that you can examine and figure out what you need for your particular setup as well as offering all the electronics and other accessories to build it
My father runs the CNC and the 80w commercial laser engraver full time doing signs and such
While you can absolutely use that router, eventually you will want to end up looking into a water cooled spindle and VFD to drive it. That router is going to be LOUD and you will end up having to replace bearings pretty often when they fail
I used the CNC xPRO v2(later upgraded to v3) for a controller on my setup but it doesnt have mach3 support, rather I have a computer connected to it and it streams gcode over a serial USB connection
There are commercial alternatives that come in kits but I was more of the type that I wanted to know how all of it worked rather than just putting parts together.
One word of warning is that this will be a money sink for a while until you get it set up like you like it. My current setup looks nothing like what I originally built because of the many upgrades I made to the rails, spindle, dust collection, etc
Hope this helps
Also, if you want to look at what Ive made with it in the past(I quit posting things a while back because it was just too much hassle to deal with social media)
Schwinn Creations FB page
They have a lot of builds that you can examine and figure out what you need for your particular setup as well as offering all the electronics and other accessories to build it
My father runs the CNC and the 80w commercial laser engraver full time doing signs and such
While you can absolutely use that router, eventually you will want to end up looking into a water cooled spindle and VFD to drive it. That router is going to be LOUD and you will end up having to replace bearings pretty often when they fail
I used the CNC xPRO v2(later upgraded to v3) for a controller on my setup but it doesnt have mach3 support, rather I have a computer connected to it and it streams gcode over a serial USB connection
There are commercial alternatives that come in kits but I was more of the type that I wanted to know how all of it worked rather than just putting parts together.
One word of warning is that this will be a money sink for a while until you get it set up like you like it. My current setup looks nothing like what I originally built because of the many upgrades I made to the rails, spindle, dust collection, etc
Hope this helps
Also, if you want to look at what Ive made with it in the past(I quit posting things a while back because it was just too much hassle to deal with social media)
Schwinn Creations FB page
re: Oxford Real Estate?
Posted by Schwinn on 4/10/17 at 10:52 pm
If there is anyway to get them into Oxford/Lafayette Schools, I would strongly push for that. I went through SP(graduated in 2006) and I was totally unprepared for college. Took me 2 years to finally know how to take notes and study, not just cram facts before a test like I had throughout my time at SP
re: Black Desert Online TD Guild Thread
Posted by Schwinn on 4/18/16 at 2:18 pm
Im not sure if I am enjoying the game or not either, but there is so much to build up that I just cant quit.
Got my hands full with horse breeding, fishing, and expanding nodes that I dont have time to do any sort of combat or grinding.
Got my hands full with horse breeding, fishing, and expanding nodes that I dont have time to do any sort of combat or grinding.
re: Black Desert Online TD Guild Thread
Posted by Schwinn on 4/7/16 at 10:00 pm
Did anyone get around to making a Guild?
Family: Schwinn1
Name: Upgrayedd
Uno
Family: Schwinn1
Name: Upgrayedd
Uno
re: Black Desert Online TD Guild Thread
Posted by Schwinn on 4/6/16 at 10:01 am
That 32gb download is no joke. Took almost 4 hours. Got done at 11:30pm and U-Verse internet went out during character creation :angry:
Thanks again for the guest pass
Thanks again for the guest pass
re: Black Desert Online TD Guild Thread
Posted by Schwinn on 4/5/16 at 4:23 pm
Appreciate it bud
re: Black Desert Online TD Guild Thread
Posted by Schwinn on 4/5/16 at 4:18 pm
Still looking for a guest pass if anyone has one to spare, can pay it forward on Friday
re: Black Desert Online TD Guild Thread
Posted by Schwinn on 3/31/16 at 10:09 am
nm
re: Christmas time .GIF thread -now NSFW
Posted by Schwinn on 12/23/15 at 9:59 am
quote:
quote:
Lol, is that really your little girl?
yep. Sure is
So you uploaded this video?
Side Eyeing Chloe
re: Streaming Xbox One to Windows 10 PC...
Posted by Schwinn on 9/29/15 at 12:24 pm
Been playing Destiny in my office while wife/kids are in the living room. I love it with the exception of having to have the controller attached.
It is real fun when you are running through a room full of baddies and all of a sudden the cord falls out :angry:
It is real fun when you are running through a room full of baddies and all of a sudden the cord falls out :angry:
re: Cincinnati 46 @ Memphis 53 FINAL
Posted by Schwinn on 9/24/15 at 9:17 pm
Complete lack of discipline
re: Cincinnati 46 @ Memphis 53 FINAL
Posted by Schwinn on 9/24/15 at 8:31 pm
Looks like we are going to get blasted again for running up the score vs Memphis here in a couple of weeks...Pass defense is horrid from what I have watched
re: 2015 Season Thread 10-3* **SUGAR BOWL CHAMPIONS**
Posted by Schwinn on 9/24/15 at 8:27 pm
I no longer think that this will be our trap game after watching this first half.
re: ***tOfficial Destiny XBONER thread***
Posted by Schwinn on 9/24/15 at 9:09 am
Anyone else skip HoW? Just wondering if I am missing anything besides storyline by jumping straight into TTK content
re: (ESO Meet Up Thread : Xbone edition)
Posted by Schwinn on 7/22/15 at 1:30 pm
Anyone playing Daggerfall Covenant on the US server?
Just hit VR1 and looking for 2nd guild
GT Ajschwinn
Just hit VR1 and looking for 2nd guild
GT Ajschwinn
re: (ESO Meet Up Thread : Xbone edition)
Posted by Schwinn on 6/26/15 at 6:51 pm
Downloading now
Going NA daggerfall covenant
Gt: ajschwinn
Going NA daggerfall covenant
Gt: ajschwinn
re: ***tOfficial Destiny XBONER thread***
Posted by Schwinn on 4/13/15 at 2:14 am
I won't be picking it back up until the expansion drops. A lot of people seem to be in the same boat
re: ***tOfficial Destiny XBONER thread***
Posted by Schwinn on 2/10/15 at 5:44 pm
I'm in but will be closer to 9 before I can hop on, titan or warlock available
re: ***tOfficial Destiny XBONER thread***
Posted by Schwinn on 2/9/15 at 11:42 am
Ditto
Popular