philabuck

The jamb is going to prevent the two pieces from raising up so you should be able to wedge it under. Use a junk piece on the bathroom side and tap it into place. Carefully tap it in once it's lined up to lock it in.

It's not ideal because if it's not lined up exactly it's going to snap off the interlock.

Might have had a small crack in the valve stem and the inspector made it into a big crack when jamming the gauge into it.

I don't get that either it would be a tough out regardless

quote:

---

Grady Sizemore named interim manager

---

Can managers go on the 15 Day DL?

Gila makes various film tints from 70 to 99%. Lowes, HD, and Amazon carry them.

Cavs are so soft. Gilbert is going to clean house tomorrow

I paid $300ish to have a company come out and drill holes and lift it with some sludge/foam mix four years ago. They did three sections of sidewalk and porch step in less than three hours.

Hasn't moved since..

quote:

---

Installation is going to kinda suck regardless. They don’t just fit/drop in to the ceiling. You’ll have to work from the attic side too to replace it.

---

I bought the Panasonic one with rails thinking I could do it from below. Has turned into a mess due to the insulation.

Climbed up in the attic and the insulation is above the joists and the trusses are blocking the easiest path.

To top it off the contractors pointed the existing vent towards the gable vent and called it a day. Likely going to admit defeat on this one and hire someone to fix it all.

I have had the best luck calling and saying I'd like my service turned off next week. Find a competitor in your market and say you are going with them.

If they don't budge just confirm the cancellation date and they will call back a day or two before.

Maybe we can run a reverse jet sweep on 2nd and 5. That will really full them.