
duckdude
Favorite team: | Alabama ![]() |
Location: | |
Biography: | |
Interests: | |
Occupation: | |
Number of Posts: | 396 |
Registered on: | 4/28/2016 |
Online Status: | Online |
Recent Posts
Message
re: MS Lt Gov threatens legal action if Bonnet Carré Spillway is opened
Posted by duckdude on 4/28/25 at 2:27 pm
From a Mississippi standpoint
How many times has Moganza been opened compared to Bonnie-Carrie?
Morganza negatively affects LA, Bonnie-Carrie negatively affects MS.
Do they not both help with flooding of N.O.?
How many times has Moganza been opened compared to Bonnie-Carrie?
Morganza negatively affects LA, Bonnie-Carrie negatively affects MS.
Do they not both help with flooding of N.O.?
re: How is Desoto National Forest
Posted by duckdude on 1/24/25 at 1:23 pm
lot's of dog hunter in the Delta, the dudes on horses are the worst but they squirrel hunt, pig hunt and deer hunt with dogs. And they don't care how many are already hunting a block of woods they turn out right on top of you.
There are some WMA's and federal reserves that don't allow dog deer hunting but most allow the dog squirrel dudes
re: Deboer. I'm kind of shocked at how poorly he did.
Posted by duckdude on 12/3/24 at 9:20 am
quote:
Kiffin is the offensive genius who took Blake Sims put up astounding offensive output.
The same Kiffin who lost to Ohio State in the Sugar Bowl because he would not let King Henry "run the damn ball"? I liked Kiffin but he sure lost that shot at another championship.
re: Please explain "Meet me at Sonic"...
Posted by duckdude on 9/16/24 at 12:15 pm
quote:
And here for your enjoyment
Knuckle Check thread located inside SONIC thread.
Reminded me how much I don't miss Navytiger
re: Decade old on this, but 3D printing is amazing
Posted by duckdude on 11/15/23 at 8:50 am
A company called "Relativity Space" is 3D printing rockets so they can custom fit a rocket to deliver your desired payload to orbit. They have sent at least one to space so far and it held up to the desired pressures :bow:
re: Paging OT Engineers…Dragline Hits Bridge and Bends Metal Girder
Posted by duckdude on 11/6/23 at 12:18 pm
Are those girders 36ksi and does the before mentioned "heat it and bend back" reduce the strength?
I ask just in general terms, I know there are things that could be done to strengthen after bending but I'm curious if the heat treatment in of itself would weaken the beam from it's original design strength.
I ask just in general terms, I know there are things that could be done to strengthen after bending but I'm curious if the heat treatment in of itself would weaken the beam from it's original design strength.
re: Flying with guns
Posted by duckdude on 10/31/23 at 2:48 pm
In a rifle case with TSA locks and keep the ammo in original box if possible.
Check in at same place u check in baggage. Some airlines it counts as one of your check baggage's so it's no extra fee.
Of course have weapons unloaded in case:)
Every airport seems to handle it slightly different but it's mostly no problem.
Your weapons case will normally be hand taken to a baggage claim office and not just set on the conveyor with the other luggage when it's time to receive it at your destination.
I have had times where it took an extra 20 minutes to get it checked in, so make sure and have some extra time.
Check in at same place u check in baggage. Some airlines it counts as one of your check baggage's so it's no extra fee.
Of course have weapons unloaded in case:)
Every airport seems to handle it slightly different but it's mostly no problem.
Your weapons case will normally be hand taken to a baggage claim office and not just set on the conveyor with the other luggage when it's time to receive it at your destination.
I have had times where it took an extra 20 minutes to get it checked in, so make sure and have some extra time.
re: Boat wont start
Posted by duckdude on 10/11/23 at 1:45 pm
does the motor turn over if you jump the solenoid?
You may be reading 12volts but the connections could fail when amperage get's involved
You may be reading 12volts but the connections could fail when amperage get's involved
re: Deck Paint
Posted by duckdude on 6/6/23 at 7:49 am
Thanks for the input, I would be happy with 3 years of durability for an easy application.
Deck Paint
Posted by duckdude on 6/5/23 at 9:57 am
The gelcoat on the interior of my 16' fiberglass Skiff is pretty wore out and I'm looking for suggestions on a good easily applied new finish? What type finish would ya'll suggest or is the durability of gelcoat still the best option?
I mostly use the boat for red-fishing so it's a saltwater environment. It's a fishing boat, I'm looking for durable and if possible easily applied and not worried about winning any boat shows.
How about color? White is cool on the feet but tuff on the eyes with the glare?
I mostly use the boat for red-fishing so it's a saltwater environment. It's a fishing boat, I'm looking for durable and if possible easily applied and not worried about winning any boat shows.
How about color? White is cool on the feet but tuff on the eyes with the glare?
re: Hall59,Speckle, and other Mississippi coast fishermen advice
Posted by duckdude on 5/3/23 at 3:07 pm
Fatality in boating accident here last weekend, make sure everything is in order, I would expect a high presence of patrolling. Accident was in the Jordan River not far north of I-10 but I wouldn’t more safety checks than normal. Good luck, bring some Gnat gear just in case
re: Jealousy of Arch & Stetson by tRant Uncle Ricos. Uncle Rico's banned from normal bathrooms
Posted by duckdude on 3/23/23 at 2:27 pm
Dear Facebook?
re: Job offer - Am I just being stubborn?
Posted by duckdude on 2/1/23 at 2:05 pm
Some really good advice has been given.
If more money interest you I would take plenty of time and look around before making any commitment, you might be surprised what opportunities are out there for you and I agree that their offer seems low for a P.E. in that area of the country.
If more money interest you I would take plenty of time and look around before making any commitment, you might be surprised what opportunities are out there for you and I agree that their offer seems low for a P.E. in that area of the country.
re: This was ruled a fumble.
Posted by duckdude on 12/29/22 at 9:19 am
I thought the targeting call on the goal line was just as bad. The QB was being thrown to the ground and was on the goal line when the second defender led with his shoulder and trying to prevent the ball carrier from the crossing the goal line, in what universe is that targeting?
re: A 51 year old utilities marking contractor told me today
Posted by duckdude on 10/25/22 at 5:02 pm
quote:
How does he keep finding people willing to do work for him
This^
Word gets around quickly, if Trump operated like a crook no one would take the job unless they had a super duper contract with lots of money up front
re: Fletching arrows question?
Posted by duckdude on 10/13/22 at 3:00 pm
I have had good luck with "lock tight" and the "Gorilla Glue".
Make sure you don't get to much or your vanes will stick to the Arizona jig.
Wraps are another good thing to add, easier clean up and removal for the next time you have to fletch the same arrow.
Make sure you don't get to much or your vanes will stick to the Arizona jig.
Wraps are another good thing to add, easier clean up and removal for the next time you have to fletch the same arrow.
re: Soldering; tips needed: UPDATE in OP
Posted by duckdude on 9/21/22 at 1:03 pm
Mirrors, metal shields and wet rags are your friends when working with tubing.
Remember some chemicals like Freon will turn deadly after heating up, make sure you know what you are dealing with.
Remember some chemicals like Freon will turn deadly after heating up, make sure you know what you are dealing with.
re: Soldering; tips needed: UPDATE in OP
Posted by duckdude on 9/21/22 at 12:19 pm
Someone already mentioned it but cleaning is very important! Sand down anything you can and make it shiny as possible. When working on tubing sand it until very clean and use a lot of flux! Also if you put the heat on the inside of the joint you are working on it will draw the solder to the heat and fill up your joint and then you cap the edge.
re: A Texas sheriff is convinced he's got DeSantis, opens probe into Martha’s Vineyard flight
Posted by duckdude on 9/19/22 at 9:59 pm
I’m pretty sure Democrats have been bussing and flying illegals all over red states for years! It’s cute they think it’s illegal now??
re: Let's put a bow on the Texas/Bama game
Posted by duckdude on 9/12/22 at 4:57 pm
quote:
obvious hold
I would give the guy an A+ on the flop
Popular