
Started By
Message
Building doors
Posted on 3/15/16 at 12:53 pm
Posted on 3/15/16 at 12:53 pm
I want to build to wooden doors for a doorway large enough for an elephant to go through. Where should I start? What kind of wood? I think the doors should be at least 10ft tall and very wide too. I am doing this so I can have room for a full size elephant trophy
Posted on 3/15/16 at 12:58 pm to The Silverback
Cocobolo wood. Start by taking a sledge hammer to whatever wall you're taking down. Any studs still left standing you can go ahead and remove those. You'll find the load-bearing ones eventually, just leave those alone.
Posted on 3/15/16 at 12:59 pm to The Silverback
First of all, WHAT THE frick! A full sized elephant trophy?
Second of all, doors are actually one of the harder things to build in order for it to work right. If you are serious I would consider the type that slides into the walls on either side. If you're doors are really big, it can be a challenge to build the frame and hinges strong enough to not tilt over time.
Second of all, doors are actually one of the harder things to build in order for it to work right. If you are serious I would consider the type that slides into the walls on either side. If you're doors are really big, it can be a challenge to build the frame and hinges strong enough to not tilt over time.
Posted on 3/15/16 at 1:07 pm to blue_morrison
I will keep that in mind
Posted on 3/15/16 at 1:10 pm to GnashRebel
I figured the hinges part would be tough, I know the doors will probably weigh a lot
And yes full size trophy
That's an example of what it might look like
And yes full size trophy
That's an example of what it might look like

Popular
Back to top

2








